Organic composting equipment is simple and practical, and the generated fertilizer can be quickly absorbed by crops. In order to make better use of the dumper in the process of organic fertilizer manufacturing, the maintenance of chemical fertilizer equipment is very important.

1. The bearing in organic fertilizer equipment bears all the load of the machine, so good lubrication is closely related to the service life of the bearing.
2. Lubricating oil directly affects the service life and operation rate of organic fertilizer equipment. Therefore, the injected lubricating oil must be clean and well sealed. The main oil filling parts of the machine are rotating shaft roller bearing, gear movable bearing and sliding surface.

3. Newly installed tires are easy to loosen and should be checked frequently.
4. Pay attention to the normal operation of all parts of the upender.

5. Pay attention to check the wear degree of the easily worn parts of the lathe, and replace the worn parts at any time.
6. Dust and other sundries shall be removed from the underframe plane of the movable device of the upender to avoid serious accidents caused by the movable bearing unable to move on the underframe when the machine encounters immovable materials. Broken.

7. When the lathe rotates the gear, if there is an impact sound, stop immediately for inspection and eliminate it.

Organic composting equipment

In the manufacture of NPK fertilizer and organic fertilizer, it is necessary to make a detailed description and solutions to the wear of machine parts and the common faults in the operation manual. On the other hand, routine maintenance is more important. Compliance routine maintenance can effectively reduce failures and prolong service life.

Compost Tank aerobic fermentation process is mainly used to produce bio fertilizer granulator, which is used in bio fertilizer production line. In the fertilizer manufacturing process, it is equipped with fertilizer equipment to complete the biological fertilizer manufacturing process.

In the biological fertilizer production line, the tank aerobic fermentation process is a method to complete the biological fertilizer production process. The production process mainly includes raw material processing, adding bacteria, and then using horizontal mixer to mix it with other raw materials.

Add bacteria twice and mix them. If the fertilizer is made into a granulator, the fertilizer granulator is used to make a bio organic fertilizer granulator. In the fertilizer manufacturing process with aerobatic composting machine, it is equipped with dryer and fertilizer cooler to dry and cool fertilizer granulator.

 

In the biological fertilizer production line, not only these fertilizer equipment are equipped to complete the production process, but also other series of fertilizer equipment for compost making are equipped to complete the production process, such as fertilizer packaging machine to complete the final fertilizer production process.

Biological fertilizer production line is mainly used for the production of biological organic fertilizer granulator. In addition to the biological fertilizer production line to be designed, these fertilizer equipment are also used in the production process of NPK fertilizer to produce NPK fertilizer granulator.