Organic composting equipment is simple and practical, and the generated fertilizer can be quickly absorbed by crops. In order to make better use of the dumper in the process of organic fertilizer manufacturing, the maintenance of chemical fertilizer equipment is very important.

1. The bearing in organic fertilizer equipment bears all the load of the machine, so good lubrication is closely related to the service life of the bearing.
2. Lubricating oil directly affects the service life and operation rate of organic fertilizer equipment. Therefore, the injected lubricating oil must be clean and well sealed. The main oil filling parts of the machine are rotating shaft roller bearing, gear movable bearing and sliding surface.

3. Newly installed tires are easy to loosen and should be checked frequently.
4. Pay attention to the normal operation of all parts of the upender.

5. Pay attention to check the wear degree of the easily worn parts of the lathe, and replace the worn parts at any time.
6. Dust and other sundries shall be removed from the underframe plane of the movable device of the upender to avoid serious accidents caused by the movable bearing unable to move on the underframe when the machine encounters immovable materials. Broken.

7. When the lathe rotates the gear, if there is an impact sound, stop immediately for inspection and eliminate it.

Organic composting equipment

In the manufacture of NPK fertilizer and organic fertilizer, it is necessary to make a detailed description and solutions to the wear of machine parts and the common faults in the operation manual. On the other hand, routine maintenance is more important. Compliance routine maintenance can effectively reduce failures and prolong service life.

Small mower is the main machine of bio organic fertilizer production line. It is designed to walk on four wheels, which can be operated by one person, and can be forward, backward and turn.

In the process of driving, the whole vehicle will be stacked on the strip fertilizer applicator before riding. Hang the rotary knife under the machine to mix, fluff and compost the raw materials of the fertilizer machine. After passing through the vehicle, a new strip stacking will be formed, which can be carried out in the open space or workshop shed.

The main technical breakthrough of composting machine lies in the integration of material crushing function in the later stage of fermentation. With the gradual dehydration of the material, a knife with a crushing device can be installed to effectively crush the plate formed in the fertilizer fermentation process.

The small stacker not only saves the crushing work before the fermentation material treatment, but also greatly improves the crushing efficiency, reduces the production cost of organic fertilizer, and fundamentally solves the limitations of the grinder.

There are several factors affecting the product quality and efficiency of commercial organic fertilizer production, equipment being the really important one. Therefore, manufacturers must pick the most suitable fertilizer machines. In this article, we’ll glance at the various processes involved in commercial organic fertilizer production, together with the organic fertilizer machines sx that happen to be much suitable for application.

There are actually mainly two processes involved with commercial organic fertilizer production. The initial one is safe organic waste treatment procedure, which can be using compost-making materials through fermentation and decomposition. The key raw materials needed here include fermentation organic industrial waste, food, paper filter mud, crop stalks, candy pomace, garbage, municipal sewage sludge, animal manure, etc. The heat generated with the thermophilic bacteria kills all pathogenic microorganisms, eggs, worms, protozoa, bacteria, and viruses which may inhabit wastes.

The other portion of the process may be the granulation of composting material. The main benefits associated with organic granulation will be to ensure organic fertilizer production that has stable nutrient content, great commercial properties, and fertilizer efficiency available for purchase, transportation, and additional storage.

Organic Materials Fermentation and Decomposition

This process typically utilizes aerobic fermentation since the working principle of compact treatment during commercial industrial manufacturing of organic fertilizer. Generally, this process contains material pre-treatment, solid-liquid separation, fermentation, decomposition, and turning. Studies have revealed how the working principle from the fermentation process entails the microbial decomposition of available organic matter.

The main fermentation parameters here are the (C: N) ratio, humidity, temperature, and gas. Therefore, the basic technology in the regulation is always to allow the right environment to the involved aerobic microorganisms. Heap mild pH value rising results in nitrogen volatilization losses during the retting process. So, lowering nitrogen loss and avoiding excessive organic matter decomposition of your respective organic fertilizer are definitely the essentials to further improve the caliber of the organic fertilizer. All of those problems may be solved by adjusting the (C: N) ratio, pH, moisture, temperature, governing the fermentation time, and improving material pre-treatment.

Fermented Organic Material Granulation

The characteristics of fermented organic materials include granulating difficulty, poor adhesion, and coarse texture. Fermented organic material granulation has become a crucial component of organic fertilizer production for a while now. It could be in disc granulation organic fertilizer production line and extrusion granulator organic production line. So, what are the machines used?

– Extrusion granulation

When composting material with the correct quantity of inorganic fertilizer, you can use a flat die extrusion granulator for extrusion. The production has strict demands of materials selection, and also pre-treatment. Additionally, it requires to alter to the most appropriate water content. As well, it needs good adhesion and fine texture. It features an easy process, no drying needed, coarse columnar grains, high product water content, and uniform particle size. Nevertheless, it provides collapsibility within the transportation and storage process, as well as low production capacity.

– Disc granulation

A disc fertilizer granulation technology can granulate almost all organic materials. Once the material dries and gets finely pulverized by using a sufficient level of fertilizer, materials are brought to a disc granulator machine.

– New type granulation

It requires the use of the latest type of organic fertilizer granulator, which can be a professional fertilizer granulator machine. The machine could be beneficial in all kinds of organic matters. No drying and crushing are needed in organic fertilizer production.

What are the disadvantages of direct processing of immature agricultural products into farmland or simple drying in organic fertilizer production line? Although animal manure is a good organic fertilizer, there are many disadvantages of chemical fertilizer if immature animal manure is directly used in farmland or simply used as organic fertilizer for drying.

1. Infection of diseases and insect pests: the direct application of immature organic matter will lead to the spread of diseases and insect pests, crop diseases, and also affect the health of consumers of agricultural products.

2. In the process of chemical fertilizer production, if the raw materials are composted without organic fertilizer, they will be fermented and the seedlings will be burned: after fertilizing the unfermented raw fertilizer, the raw fertilizer will start to ferment under the condition of water and other fermentation conditions, and the heat generated by fermentation will affect the growth of agricultural crops.

3. Soil anoxia: organic matter will consume oxygen in the soil during differentiation, which will limit the growth of crops. Therefore, compost can only be used after harmless treatment.

4. Low fertilizer utilization rate: most of the unfermented and rotten organic fertilizers in the organic fertilizer production line or biological fertilizer production line are in the organic state or slow action state, which can not be directly absorbed and utilized by crops, but can only be absorbed and used after being differentiated and transformed by crops.

No need to use and transport directly, large volume and moisture content. Therefore, compost can only be used after harmless decomposition and treatment. More detailed info, welcome go to https://fertilizerplantequiment.com/

Organic fertilizer is produced by the fertilizer production equipment with complete equipment. The raw materials can be chicken manure, cow manure, etc. various fertilizer production lines are designed according to different raw materials.

The disc pelletizing organic fertilizer production line has the advantages of low price, high cost performance and simple operation, and is especially suitable for pelletizing chicken manure organic fertilizer. Here, we will introduce the granulation technology of large-scale chicken manure pan. Organic fertilizer production line.

1. For the composting of large-scale chicken manure production line, it is usually not necessary to occupy too much space, and the walking dumper can be used for dumping and fermentation. With the gradual dehydration of materials, the cutter shaft with crushing device can effectively crush the plate formed in the fertilizer fermentation process, which not only saves the crusher, but also greatly improves the utilization rate of materials. Crushing efficiency and cost reduction fundamentally solve the problem that production capacity is affected by crushing mechanism.

2. The fermented materials are added into the disc granulator for granulation. The angle of the large disc chicken manure granulator adopts a full circle structure. In the production process, the appropriate amount of water is added to make the materials collide to form a disc granulator. The disc granulator has three outlets, which is convenient for intermittent production, greatly reduces the intensity and improves the labor efficiency.

3. After granulation, the moisture and strength of the material can not reach the standard and need to be dried. The rotary chicken manure dryer makes full use of the function of the board to make the material fully contact with the hot air generated. Through the hot blast stove, the material is dried and the strength is improved.

4. The dried and cooled materials are transported to the screening equipment through the belt conveyor to screen the granular organic fertilizer and fine powder organic fertilizer. The fine powder organic fertilizer can be sent to the disc granulator through the return belt for new granulation, forming a complete production cycle.
5. Finally, the qualified organic fertilizer is sent to the automatic packaging machine for packaging. The general fertilizer production process around these processes needs these fertilizer equipment to complete the complete production process.

The above small-scale weaving and finishing process is a complete large-scale chicken manure organic fertilizer production line process. Disc granulation organic fertilizer production line is suitable for organic fertilizer production line with an annual output of less than 10000. If you want to know more about the process of organic fertilizer equipment, please contact us. We are a professional fertilizer machinery manufacturer, and we have also designed a biological fertilizer production line to manufacture biological fertilizer Machine fertilizer.

Organic fertilizer production and bio fertilizer production technology
The production line of organic fertilizer granulating machine and bio fertilizer is designed for the production of bio fertilizer granulating machine. The low price of organic fertilizer and bio organic fertilizer is due to their wide variety of raw materials.

How to use fertilizer manufacturing technology to produce bio fertilizer granulating machine in the complete bio fertilizer production line?
In the process of fertilizer production, different types of fertilizer equipment are equipped to complete the production process. The details are as follows:

Step 1: fermentation

a。 Add fermentation bacteria: 60% of livestock manure, 20% of food bacterial residue, 10% of materials with low water content such as straw (reduce water content to 40%, which is the most suitable water for fermentation), and 1% of bacterial fermenter.

The purpose of adding fungicide is to increase the temperature rising speed and control the fermentation temperature at 65 ℃ ~ 70 ℃. The peculiar smell and bactericidal effect in the fermentation process were eliminated, and the fermentation speed was accelerated, so that the fermentation time was shortened to about 15-20 days;

During fermentation, it should be noted that throwing should be carried out every 2-3 days. If the workload is too large, fermentation throwing machine can be used. The aim is to increase oxygen content, compost needs to be turned over continuously; at the same time, it can make the combination of fermentation bacteria and materials more uniform, increase maturity, and accelerate fermentation maturity.

Production of bio fertilizer

b。 Mashed potatoes after fermentation and ripening:
Because some stem rods are too large to fertilize, it is necessary to crush these materials by semi wet material crusher to prepare the next granulation (the smaller the crushed material, the easier it is to produce grains). The materials of crushing and mixing are powder, which is not conducive to mechanical fertilization.

Step 2: Granulation

If it’s an organic fertilizer manufacturer, it needs to be pelletized and sold. The price of granular organic fertilizer produced in the organic fertilizer production line is much higher than that of the ordinary fermented agricultural fertilizer. That’s why organic fertilizer is a few dollars less expensive and the profit is even more substantial.

a。 Mixing: in the production line of bio fertilizer, add proper amount of urea (and NPK) into the crushed products after fermentation, and stir evenly with horizontal mixer. The state of organic fertilizer has a significant regulatory effect because of the content of NPK.

Although the nutrients of fermented organic fertilizer are rich, NPK content still does not meet the national organic fertilizer content standard. It is necessary to add NPK to the granulation process, smash it into uniform particle size and turn them into powder, which is beneficial to granulation and fertilization.

Granulation: different granulation methods are selected according to water content and production capacity. When the output is large and the water content is high (low cost), the material is dried and cooled evenly by disc granulator to form stirring. Disc granulator is a kind of equipment used in organic fertilizer production line to produce organic fertilizer.

When the production is small and the water content is low (high cost), the mixing granulator no longer needs drying and cooling, and the granulation rate is relatively high, which can reach more than 90%, and the hardness is good and it is not easy to disperse.

c。 Screening: introduce granular materials into the sieve separator, screen and put 3mm materials directly into the packaging link. They can be sold as commodities: Materials less than 3mm that do not meet the standards shall continue until the diameter reaches the standard; return particles larger than 3mm to grinding stage and then make grains.

Compared with traditional composting, organic fertilizer has more development and mature process, and deodorant is added. Therefore, in the process of bio fertilizer production, there is no peculiar smell, and the mature organic fertilizer will not produce secondary maturity in sowing.

At the same time, because of the rich nutrients, the soil structure can be improved and soil hardening avoided; in the seedling combustion; meanwhile, due to the rich nutrient elements, the soil structure can be improved and bacteria can be added to the fermentation process. In the process of decomposition, the nutrients which are not easily decomposed in soil are transformed into the form which is beneficial to plant absorption and improve soil quality.

Due to the promotion of organic fertilizer in recent years, the organic fertilizer equipment has also been well developed, and has a broad prospect in the future. Only by improving the quality of the organic fertilizer manufacturing machine can the quality of the organic fertilizer be improved. Only by adding new granulator and advanced technology can we obtain high-quality fertilizer products.

In order to improve the quality of organic fertilizer sales and improve the competitiveness of enterprises in the industry, we must start with the quality source. As a manufacturer of organic fertilizer production line, we have always been adhering to the concept of accepting challenges, constantly innovating and reforming, and serving the concept of providing assured products and meticulous services, and strive to become the leader line enterprise of organic fertilizer production.

Among the three ways of fertilizer granulation, the disc granulator is more suitable for the granulation of organic and inorganic compound fertilizer, and the effect is ideal. The disc granulator is mainly composed of disc granulator, injection system, transmission device, support, etc. Drum granulator is suitable for the granulation of organic fertilizer and NPK fertilizer in large fertilizer plants, and is widely used in various industrial fields.
Organic fertilizer granulation equipment
Maintaining organic fertilizer is also one of the measures to improve the good operation of organic fertilizer equipment. Only when the equipment quality is improved will the product quality be improved. There are also options for raw materials. Only good raw materials can produce high quality organic fertilizer. Livestock and poultry manure is not only an important raw material for organic fertilizer production, but also can participate in biogas power generation.

More types granulation equipment for fertilizer production go to https://fertilizergranulatormanufacturer.com/

The equipment needed for the production of biological fertilizer accelerates the development of green organic agriculture and the historical inevitability of the production and development of green organic agriculture. Since the history of mankind, agricultural production has roughly experienced the development stage from primitive agriculture, traditional agriculture, oil agriculture to green organic agriculture.

Nowadays, the world’s environmental protection, resource recovery and recycling are important topics to be studied in the 21st century. How to use advanced bio organic fertilizer equipment and technology to transform the decomposable organic matter accumulated in the garbage on the mountain into treasure, so as to make high-efficiency organic fertilizer return to nature and ensure the quality of human life has become a major problem. We are now facing a challenge.

At present, there are three known waste disposal methods, namely landfill, incineration and bioengineering. Incineration method: Although this method is more advanced, it is very expensive and has no social benefits. In the process of incineration, air pollution will also be caused. Bioengineering technology treatment method: this method has the advantages of low investment, high efficiency and high safety. The new bio organic fertilizer manufacturing equipment makes use of the rapid metabolism and effective fermentation of microorganisms to transform all decomposable organic matter in garbage into stable and efficient bio organic fertilizer in a short time.

Collection of correct raw materials, selection of efficient organic fertilizer equipment, various high-quality additives and well-trained on-site technology are important factors for the success of the production process. A. Forklift handling capacity: Based on 10 hours per day, the product humidity is 20%, the particle size is 6 mm, and the handling capacity is between 500 tons and 800 tons.

Function: to separate the final bio organic fertilizer, impurities and large particles of unfermented organic matter. B. Deodorization system. The deodorization system is installed on the mixer. It uses the power generated by the forklift diesel engine to increase the pressure of the deodorization system, so that the liquid deodorant can be transformed into mist and sprayed on the garbage, so as to achieve the effect of rapid deodorization. C conveying system: used to assist in the selection of recyclable waste. D packaging equipment: the efficiency of the equipment is 18 bags and 25 kg bags per minute.