Organic composting equipment is simple and practical, and the generated fertilizer can be quickly absorbed by crops. In order to make better use of the dumper in the process of organic fertilizer manufacturing, the maintenance of chemical fertilizer equipment is very important.

1. The bearing in organic fertilizer equipment bears all the load of the machine, so good lubrication is closely related to the service life of the bearing.
2. Lubricating oil directly affects the service life and operation rate of organic fertilizer equipment. Therefore, the injected lubricating oil must be clean and well sealed. The main oil filling parts of the machine are rotating shaft roller bearing, gear movable bearing and sliding surface.

3. Newly installed tires are easy to loosen and should be checked frequently.
4. Pay attention to the normal operation of all parts of the upender.

5. Pay attention to check the wear degree of the easily worn parts of the lathe, and replace the worn parts at any time.
6. Dust and other sundries shall be removed from the underframe plane of the movable device of the upender to avoid serious accidents caused by the movable bearing unable to move on the underframe when the machine encounters immovable materials. Broken.

7. When the lathe rotates the gear, if there is an impact sound, stop immediately for inspection and eliminate it.

Organic composting equipment

In the manufacture of NPK fertilizer and organic fertilizer, it is necessary to make a detailed description and solutions to the wear of machine parts and the common faults in the operation manual. On the other hand, routine maintenance is more important. Compliance routine maintenance can effectively reduce failures and prolong service life.

As one of the mainstream equipment of NPK fertilizer production line, compound fertilizer equipment must have its advantages. Because the compound fertilizer equipment can produce a variety of fertilizers, especially the coated fertilizer used in the current market. Coated fertilizer was boldly conceived as early as the beginning of last century. Through efforts, it finally realized and entered the era of coated fertilizer.

Advantages of coated fertilizer:

1. It can reduce the loss of fertilizer nutrients and significantly improve the utilization rate of fertilizer;
2. Avoid excessive fertilization and soil hardening of dry crops.;
3. Prevent the accumulation of nitrate in soil, pollute the environment and even poison human and livestock due to large amount of nitrogen fertilizer;

4. It can coordinate crop nutrient supply, implement balanced fertilization and achieve high quality and high yield;
5. Reduce the times of fertilization and save labor and time;
6. It is suitable for mechanized fertilization and can greatly improve the work efficiency of large-scale fertilization.

Selection principles of coating materials

Coating material is the material basis to ensure the function of coated fertilizer. In order to ensure the expected effect of coating fertilizer, the selected coating material must meet the following requirements.

1. Adhesion. After surface treatment, the granular fertilizer contacts with the powder of the coating material in the disc granulation equipment to make the coating material adhere to the fertilizer surface evenly, and finally seal the surface with a covering agent.
2. Spraying. The coating material is melted and sprayed on the fertilizer in a disc fertilizer granulator or drum fertilizer granulator, and then treated with an appropriate treatment agent.
3. Put the fertilizer to be coated together with the coating material into the fluidized bed and fully mix to form uniform particle coated fertilizer.
The above is the material selection requirements of coated fertilizer produced by compound fertilizer equipment and the advantages of coated fertilizer. Moreover, the production of this coated fertilizer is relatively simple compared with other fertilizers, and it is also the choice of fertilizer manufacturers who have just entered this industry.

More detailed info, go to https://compostturnermachine.com/phosphatic-granule-fertilizer-production-line-in-uzbekistan/

About mechanical products, there will be various problems in operation. Organic fertilizer granulator is also a kind of machinery. Of course, I won’t say no problem.

So, under normal circumstances, what problems should we pay attention to? Today, Zhengzhou SX organic fertilizer machinery will mainly explain some problems that are easy to occur in the operation of the organic fertilizer granulator.

In the operation process of organic fertilizer granulator, if the configuration is not correct, it is easy to break the bearing. Of course, this problem usually occurs after a long time of use, because new machine bearings will never cause problems.

Yes. Everyone knows that the quality of a new machine is very important, so you usually don’t have to worry about quality. In general, both the granulator and other organic fertilizer equipment will be overloaded, because the domestic overtime is still serious.

So, can our equipment be used in this way? How to ensure the safety of equipment in long-term use?

For the newly installed fertilizer granulator, due to the initial operation, it is likely that there are still problems in most places, such as insufficient screw tightening, so it is necessary to check every time to avoid the machine has begun to wear, but you do not know.

For the equipment that has been used for a long time, the area that needs to be inspected has become the area prone to aging and deformation. As long as there is no problem with the equipment itself, there is usually no problem with long-term use.

However, no matter the granulator or other organic fertilizer equipment, our organic fertilizer equipment manufacturers do not recommend overloading, after all, it will consume the service life of the machine itself.

More details, go to https://organicfertilizermachines.com/

Small mower is the main machine of bio organic fertilizer production line. It is designed to walk on four wheels, which can be operated by one person, and can be forward, backward and turn.

In the process of driving, the whole vehicle will be stacked on the strip fertilizer applicator before riding. Hang the rotary knife under the machine to mix, fluff and compost the raw materials of the fertilizer machine. After passing through the vehicle, a new strip stacking will be formed, which can be carried out in the open space or workshop shed.

The main technical breakthrough of composting machine lies in the integration of material crushing function in the later stage of fermentation. With the gradual dehydration of the material, a knife with a crushing device can be installed to effectively crush the plate formed in the fertilizer fermentation process.

The small stacker not only saves the crushing work before the fermentation material treatment, but also greatly improves the crushing efficiency, reduces the production cost of organic fertilizer, and fundamentally solves the limitations of the grinder.

In the process of organic compost production, different equipment of organic compost production line must be selected according to the production situation of customers.

Today, let’s look at the advantages of horizontal and double axel mixers in organic compost mixers:

The double axis mixer uses the synchronous rotation of two symmetrical spiral shafts to add dry water and other powder materials while stirring, so that the dry powder can be humidified evenly to prevent the wet materials from releasing dry ash and water seepage. , convenient for loading and transportation of humidified ash or transfer of humidified ash to other conveying equipment. Horizontal mixer can get enough raw material mixing, thus improving the uniformity of mixing, and suitable for the mixing of compost raw materials.

The double axel mixer is mainly composed of shell, screw shaft assembly, driving device, pipeline, cover, chain cover, etc. The shell is mainly composed of plates and steel profiles, welded and formed in the manufacturing plant and assembled with other components. The shell is tightly sealed and free from the rise and leakage of fly ash.

Depending on the feasibility, the horizontal mixer is not affected by the size and density. It has a good effect on viscous substances. The stable mixing process reduces the damage to the fragile materials, and the structure of the flying knife also plays a role in crushing. The horizontal structure reduces the height of the fuselage and is easy to install. The forward and reverse screws are mounted on the same flat shaft to form a low power and high efficiency mixing environment.
Biaxial mixer

In NPK compost production line, the series of compost machines can use simple composting machine to ferment raw materials, which will be equipped with fermentation composting machine. Then, compost crusher, compost mixer and compost crusher will be equipped to deal with the raw materials. We can use chain crusher and horizontal mixer to deal with organic raw materials. Next, in the production of organic compost granulator, in the compost manufacturing process must be equipped with compost granulator.

Zhengzhou SX heavy industry teaches you the maintenance method of compound fertilizer granulator.

Machine maintenance: Bearing crusher bearing is full load, so good lubrication bearing life has a great relationship, it directly affects the service life and availability of the machine, and requires lubricating oil must be clean, seal must be good, and main engine oil: rotary bearing; rolling bearing; gear movable bearing and sliding plane. Newly installed tires are easy to loosen and must be checked frequently. Please note that the machine components are working properly.

Check the wear degree of vulnerable parts and pay attention to replace them at any time. When placing the underframe of the movable unit, dust and other substances should be removed to prevent the machine from moving these substances to the underframe when the movable bearing fails, which may lead to serious accidents.

Bearing oil temperature if the rotating gear is in normal operation, if there is impact, please stop the inspection immediately and eliminate it.
Installation and commissioning: the equipment shall be horizontally installed in the concrete on the ground, and the bolts shall be fixed on the ground. When installing, please pay attention to the main body and vertical height.

After installation, if you are welcome to tighten the bolt and the host (such as the door), please tighten it. The switch is controlled according to the power configuration of the equipment. After inspection, no-load test, test normal production.

The maintenance of fertilizer granulator from SXFGF is a very important and frequent work. It should be operated and maintained in close cooperation with full-time duty personnel.

There are several factors affecting the product quality and efficiency of commercial organic fertilizer production, equipment being the really important one. Therefore, manufacturers must pick the most suitable fertilizer machines. In this article, we’ll glance at the various processes involved in commercial organic fertilizer production, together with the organic fertilizer machines sx that happen to be much suitable for application.

There are actually mainly two processes involved with commercial organic fertilizer production. The initial one is safe organic waste treatment procedure, which can be using compost-making materials through fermentation and decomposition. The key raw materials needed here include fermentation organic industrial waste, food, paper filter mud, crop stalks, candy pomace, garbage, municipal sewage sludge, animal manure, etc. The heat generated with the thermophilic bacteria kills all pathogenic microorganisms, eggs, worms, protozoa, bacteria, and viruses which may inhabit wastes.

The other portion of the process may be the granulation of composting material. The main benefits associated with organic granulation will be to ensure organic fertilizer production that has stable nutrient content, great commercial properties, and fertilizer efficiency available for purchase, transportation, and additional storage.

Organic Materials Fermentation and Decomposition

This process typically utilizes aerobic fermentation since the working principle of compact treatment during commercial industrial manufacturing of organic fertilizer. Generally, this process contains material pre-treatment, solid-liquid separation, fermentation, decomposition, and turning. Studies have revealed how the working principle from the fermentation process entails the microbial decomposition of available organic matter.

The main fermentation parameters here are the (C: N) ratio, humidity, temperature, and gas. Therefore, the basic technology in the regulation is always to allow the right environment to the involved aerobic microorganisms. Heap mild pH value rising results in nitrogen volatilization losses during the retting process. So, lowering nitrogen loss and avoiding excessive organic matter decomposition of your respective organic fertilizer are definitely the essentials to further improve the caliber of the organic fertilizer. All of those problems may be solved by adjusting the (C: N) ratio, pH, moisture, temperature, governing the fermentation time, and improving material pre-treatment.

Fermented Organic Material Granulation

The characteristics of fermented organic materials include granulating difficulty, poor adhesion, and coarse texture. Fermented organic material granulation has become a crucial component of organic fertilizer production for a while now. It could be in disc granulation organic fertilizer production line and extrusion granulator organic production line. So, what are the machines used?

– Extrusion granulation

When composting material with the correct quantity of inorganic fertilizer, you can use a flat die extrusion granulator for extrusion. The production has strict demands of materials selection, and also pre-treatment. Additionally, it requires to alter to the most appropriate water content. As well, it needs good adhesion and fine texture. It features an easy process, no drying needed, coarse columnar grains, high product water content, and uniform particle size. Nevertheless, it provides collapsibility within the transportation and storage process, as well as low production capacity.

– Disc granulation

A disc fertilizer granulation technology can granulate almost all organic materials. Once the material dries and gets finely pulverized by using a sufficient level of fertilizer, materials are brought to a disc granulator machine.

– New type granulation

It requires the use of the latest type of organic fertilizer granulator, which can be a professional fertilizer granulator machine. The machine could be beneficial in all kinds of organic matters. No drying and crushing are needed in organic fertilizer production.

What are the disadvantages of direct processing of immature agricultural products into farmland or simple drying in organic fertilizer production line? Although animal manure is a good organic fertilizer, there are many disadvantages of chemical fertilizer if immature animal manure is directly used in farmland or simply used as organic fertilizer for drying.

1. Infection of diseases and insect pests: the direct application of immature organic matter will lead to the spread of diseases and insect pests, crop diseases, and also affect the health of consumers of agricultural products.

2. In the process of chemical fertilizer production, if the raw materials are composted without organic fertilizer, they will be fermented and the seedlings will be burned: after fertilizing the unfermented raw fertilizer, the raw fertilizer will start to ferment under the condition of water and other fermentation conditions, and the heat generated by fermentation will affect the growth of agricultural crops.

3. Soil anoxia: organic matter will consume oxygen in the soil during differentiation, which will limit the growth of crops. Therefore, compost can only be used after harmless treatment.

4. Low fertilizer utilization rate: most of the unfermented and rotten organic fertilizers in the organic fertilizer production line or biological fertilizer production line are in the organic state or slow action state, which can not be directly absorbed and utilized by crops, but can only be absorbed and used after being differentiated and transformed by crops.

No need to use and transport directly, large volume and moisture content. Therefore, compost can only be used after harmless decomposition and treatment. More detailed info, welcome go to https://fertilizerplantequiment.com/

Organic fertilizer is produced by the fertilizer production equipment with complete equipment. The raw materials can be chicken manure, cow manure, etc. various fertilizer production lines are designed according to different raw materials.

The disc pelletizing organic fertilizer production line has the advantages of low price, high cost performance and simple operation, and is especially suitable for pelletizing chicken manure organic fertilizer. Here, we will introduce the granulation technology of large-scale chicken manure pan. Organic fertilizer production line.

1. For the composting of large-scale chicken manure production line, it is usually not necessary to occupy too much space, and the walking dumper can be used for dumping and fermentation. With the gradual dehydration of materials, the cutter shaft with crushing device can effectively crush the plate formed in the fertilizer fermentation process, which not only saves the crusher, but also greatly improves the utilization rate of materials. Crushing efficiency and cost reduction fundamentally solve the problem that production capacity is affected by crushing mechanism.

2. The fermented materials are added into the disc granulator for granulation. The angle of the large disc chicken manure granulator adopts a full circle structure. In the production process, the appropriate amount of water is added to make the materials collide to form a disc granulator. The disc granulator has three outlets, which is convenient for intermittent production, greatly reduces the intensity and improves the labor efficiency.

3. After granulation, the moisture and strength of the material can not reach the standard and need to be dried. The rotary chicken manure dryer makes full use of the function of the board to make the material fully contact with the hot air generated. Through the hot blast stove, the material is dried and the strength is improved.

4. The dried and cooled materials are transported to the screening equipment through the belt conveyor to screen the granular organic fertilizer and fine powder organic fertilizer. The fine powder organic fertilizer can be sent to the disc granulator through the return belt for new granulation, forming a complete production cycle.
5. Finally, the qualified organic fertilizer is sent to the automatic packaging machine for packaging. The general fertilizer production process around these processes needs these fertilizer equipment to complete the complete production process.

The above small-scale weaving and finishing process is a complete large-scale chicken manure organic fertilizer production line process. Disc granulation organic fertilizer production line is suitable for organic fertilizer production line with an annual output of less than 10000. If you want to know more about the process of organic fertilizer equipment, please contact us. We are a professional fertilizer machinery manufacturer, and we have also designed a biological fertilizer production line to manufacture biological fertilizer Machine fertilizer.

Due to the promotion of organic fertilizer in recent years, the organic fertilizer equipment has also been well developed, and has a broad prospect in the future. Only by improving the quality of the organic fertilizer manufacturing machine can the quality of the organic fertilizer be improved. Only by adding new granulator and advanced technology can we obtain high-quality fertilizer products.

In order to improve the quality of organic fertilizer sales and improve the competitiveness of enterprises in the industry, we must start with the quality source. As a manufacturer of organic fertilizer production line, we have always been adhering to the concept of accepting challenges, constantly innovating and reforming, and serving the concept of providing assured products and meticulous services, and strive to become the leader line enterprise of organic fertilizer production.

Among the three ways of fertilizer granulation, the disc granulator is more suitable for the granulation of organic and inorganic compound fertilizer, and the effect is ideal. The disc granulator is mainly composed of disc granulator, injection system, transmission device, support, etc. Drum granulator is suitable for the granulation of organic fertilizer and NPK fertilizer in large fertilizer plants, and is widely used in various industrial fields.
Organic fertilizer granulation equipment
Maintaining organic fertilizer is also one of the measures to improve the good operation of organic fertilizer equipment. Only when the equipment quality is improved will the product quality be improved. There are also options for raw materials. Only good raw materials can produce high quality organic fertilizer. Livestock and poultry manure is not only an important raw material for organic fertilizer production, but also can participate in biogas power generation.

More types granulation equipment for fertilizer production go to https://fertilizergranulatormanufacturer.com/