Granules are an important part of organic fertilizer equipment. If organic fertilizer is made into particles, there must be organic fertilizer granulators. At present, there are several types of organic fertilizers on the market, including disc particlers, flat membrane granulators and roller extruders.

The granules are mainly performed by mixing granules, squeezing granules and spray drying.

The role of organic fertilizer equipmnent is to make organic fertilizer. Organic fertilizer granulator uses pressure to condense the solid material, and then squeeze out the material through two reverse rotating rotations, and the roller is driven by an eccentric sleeve or a hydraulic system.

When the solid material is squeezed, the air between the powder particles should be removed first to re -arrange the particles to eliminate the gap between the materials.

Organic fertilizers have several advantages after making organic manureinto fertilizer, which can make the land easier to digest, so that organic fertilizer can be quickly combined with the land. Transport, so we can put it directly into the bag to transport. The fourth warehouse is convenient for us to store it in the warehouse after air -drying, without worrying about the deterioration or rotten of organic fertilizers.

More different info on organic fertilizer machines, welcome go to https://www.fertilizerplantcost.com/

About mechanical products, there will be various problems in operation. Organic fertilizer granulator is also a kind of machinery. Of course, I won’t say no problem.

So, under normal circumstances, what problems should we pay attention to? Today, Zhengzhou SX organic fertilizer machinery will mainly explain some problems that are easy to occur in the operation of the organic fertilizer granulator.

In the operation process of organic fertilizer granulator, if the configuration is not correct, it is easy to break the bearing. Of course, this problem usually occurs after a long time of use, because new machine bearings will never cause problems.

Yes. Everyone knows that the quality of a new machine is very important, so you usually don’t have to worry about quality. In general, both the granulator and other organic fertilizer equipment will be overloaded, because the domestic overtime is still serious.

So, can our equipment be used in this way? How to ensure the safety of equipment in long-term use?

For the newly installed fertilizer granulator, due to the initial operation, it is likely that there are still problems in most places, such as insufficient screw tightening, so it is necessary to check every time to avoid the machine has begun to wear, but you do not know.

For the equipment that has been used for a long time, the area that needs to be inspected has become the area prone to aging and deformation. As long as there is no problem with the equipment itself, there is usually no problem with long-term use.

However, no matter the granulator or other organic fertilizer equipment, our organic fertilizer equipment manufacturers do not recommend overloading, after all, it will consume the service life of the machine itself.

More details, go to https://organicfertilizermachines.com/

Zhengzhou SX heavy industry teaches you the maintenance method of compound fertilizer granulator.

Machine maintenance: Bearing crusher bearing is full load, so good lubrication bearing life has a great relationship, it directly affects the service life and availability of the machine, and requires lubricating oil must be clean, seal must be good, and main engine oil: rotary bearing; rolling bearing; gear movable bearing and sliding plane. Newly installed tires are easy to loosen and must be checked frequently. Please note that the machine components are working properly.

Check the wear degree of vulnerable parts and pay attention to replace them at any time. When placing the underframe of the movable unit, dust and other substances should be removed to prevent the machine from moving these substances to the underframe when the movable bearing fails, which may lead to serious accidents.

Bearing oil temperature if the rotating gear is in normal operation, if there is impact, please stop the inspection immediately and eliminate it.
Installation and commissioning: the equipment shall be horizontally installed in the concrete on the ground, and the bolts shall be fixed on the ground. When installing, please pay attention to the main body and vertical height.

After installation, if you are welcome to tighten the bolt and the host (such as the door), please tighten it. The switch is controlled according to the power configuration of the equipment. After inspection, no-load test, test normal production.

The maintenance of fertilizer granulator from SXFGF is a very important and frequent work. It should be operated and maintained in close cooperation with full-time duty personnel.