Compound Fertilizer Granulation Equipment Maintenance Tips

Zhengzhou SX heavy industry teaches you the maintenance method of compound fertilizer granulator.

Machine maintenance: Bearing crusher bearing is full load, so good lubrication bearing life has a great relationship, it directly affects the service life and availability of the machine, and requires lubricating oil must be clean, seal must be good, and main engine oil: rotary bearing; rolling bearing; gear movable bearing and sliding plane. Newly installed tires are easy to loosen and must be checked frequently. Please note that the machine components are working properly.

Check the wear degree of vulnerable parts and pay attention to replace them at any time. When placing the underframe of the movable unit, dust and other substances should be removed to prevent the machine from moving these substances to the underframe when the movable bearing fails, which may lead to serious accidents.

Bearing oil temperature if the rotating gear is in normal operation, if there is impact, please stop the inspection immediately and eliminate it.
Installation and commissioning: the equipment shall be horizontally installed in the concrete on the ground, and the bolts shall be fixed on the ground. When installing, please pay attention to the main body and vertical height.

After installation, if you are welcome to tighten the bolt and the host (such as the door), please tighten it. The switch is controlled according to the power configuration of the equipment. After inspection, no-load test, test normal production.

The maintenance of fertilizer granulator from SXFGF is a very important and frequent work. It should be operated and maintained in close cooperation with full-time duty personnel.